Moplen EP310M HP
Description
Moplen EP310M HP is a heterophasic copolymer, used in film applications for lamination on other substrates where high impact at room and low temperatures is needed. Moreover EP310M HP features a good stiffness.
This new grade is produced using a non-phthalate catalyst system favored by customers in applications intended for food contact. The film viscosity achieved with Moplen EP310M HP offers good processability on cast lines. This polypropylene heterophasic copolymer exhibits high impact, good puncture, good tear resistance, high seal strength and seal integrity.
Availability
Africa-Middle East, Europe
Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg)
7.5 g/10 min
Density
0.90 g/cm³
Tensile Modulus
1050 MPa
Tensile Stress at Break
16.7 MPa
Tensile Stress at Yield
21 MPa
Tensile Strain at Break
36 %
Tensile Strain at Yield
6 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A)
45 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A)
9 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A)
7 kJ/m²
Ductile/Brittle Transition Temperature
-55 °C
Ball Indentation Hardness
46 MPa
Vicat Softening Temperature (A50)
144 °C
Deflection Temperature Under Load (0.45 MPa, Unannealed)
80 °C