Indure X76-UV 4WFA

Description

Indure X76-UV 4WFA is an engineered polyolefin resin that is typically used for automotive exterior trim applications. It offers an excellent combination of scratch resistance, UV resistance, high-gloss part appearance, good processability and a balance of stiffness and impact resistance.

Availability

North America

Product data and technical information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 35 g/10 min

Density 0.91 g/cm³

Flexural Modulus (23 °C, 2 mm/min) 950 MPa

Tensile Stress at Yield (23 °C, 50 mm/min) 20 MPa

Notched Izod Impact Strength (23 °C) 40 kJ/m²

Notched Izod Impact Strength (0 °C) 7.4 kJ/m²

Shore Hardness (Shore D) 55

Deflection Temperature Under Load (1.80 MPa, Unannealed) 48 °C

Gloss (60°) 85

Mold Shrinkage

Technical Data Sheet Technical Data Sheet

Safety Data Sheet Safety Data Sheet- Global

Marketing Polypropylene

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications